Introduction
Having a garage door that won’t close can be frustrating and inconvenient. If you’re experiencing the issue of your garage door blinking but not closing, this article is here to help you troubleshoot and resolve the problem. We’ll provide you with some tips and solutions to get your garage door back to its normal functioning state.
1. Check the Safety Sensors
The safety sensors are located on each side of the garage door, near the floor. They emit an invisible beam that, when interrupted, prevents the door from closing. Make sure that the sensors are properly aligned and free from any obstructions, such as dirt or spider webs. Clean the sensors and adjust their positions if necessary.
2. Inspect the Wiring Connections
Check the wiring connections between the safety sensors and the garage door opener. Ensure that the wires are securely connected and not damaged or frayed. If you find any issues with the wiring, repair or replace it as needed.
3. Test the Remote Control Batteries
If your garage door is operated by a remote control, the issue might be as simple as low batteries. Replace the batteries and try closing the door again. Ensure that you’re within the range of the opener when using the remote control.
4. Examine the Wall Button
If the wall button is malfunctioning, it can cause the garage door to blink but not close. Inspect the button for any signs of damage or dirt. Clean it and make sure it’s properly connected. If necessary, replace the wall button with a new one.
5. Check for Any Blockages
Objects or debris in the garage door’s pathway can prevent it from closing. Inspect the area and remove any obstructions that may be blocking the door’s movement. This includes items such as trash cans, bicycles, or tools.
6. Lubricate the Door and Tracks
A lack of lubrication can cause the garage door to get stuck while closing. Apply a silicone-based lubricant to the door’s hinges, rollers, and tracks. This will ensure smooth operation and prevent any sticking or blinking issues.
7. Test the Manual Operation
If the door is equipped with a manual release handle, try operating the door manually. Pull the handle to disengage the door from the opener and then attempt to close it manually. If the door closes without any issues, the problem might lie with the opener itself.
8. Reset the Opener
Resetting the garage door opener can sometimes resolve the blinking not closing issue. Consult your opener’s manual for instructions on how to perform a reset. This may involve turning off the power to the opener for a few minutes or pressing a specific combination of buttons.
9. Seek Professional Help
If you’ve tried all the above steps and your garage door is still blinking and not closing, it’s time to call in a professional. A trained technician will have the expertise to diagnose and fix the problem quickly and effectively.
Conclusion
Dealing with a garage door that is blinking but not closing can be frustrating, but by following these troubleshooting steps, you can often resolve the issue on your own. Remember to always prioritize safety and, if needed, seek professional assistance. With proper maintenance and care, your garage door will be back to functioning smoothly in no time.