Introduction
Removing a Kwikset door handle may seem like a daunting task, especially if you can’t locate any visible screws. However, with the right approach and a little patience, you can easily remove the door handle without any screws. In this article, we will guide you through the process, providing step-by-step instructions for a hassle-free experience.
Gather the Required Tools
Before you begin, make sure you have the necessary tools handy. You will need a flathead screwdriver, a pair of pliers, and a small Allen wrench. These tools will help you navigate through the different components of the Kwikset door handle.
Identify the Hidden Release Button
Many Kwikset door handles come with a hidden release button, which allows you to remove the handle without any visible screws. Look for a small slot or hole typically located on the underside or backside of the handle. This is where you will find the release button.
Locate and Press the Release Button
Insert the small Allen wrench or a similar-sized object into the slot or hole you identified earlier. Apply gentle pressure and press down until you feel the release button engage. This may require a bit of patience and trial-and-error, but once you find the right spot, the handle should start to loosen.
Remove the Handle
With the release button engaged, use the flathead screwdriver to pry open the cover plate or escutcheon surrounding the door handle. Be cautious not to damage the plate or handle while doing this. Once the cover plate is removed, you will be able to see the inner workings of the handle.
Disconnect the Interior Components
Now that the cover plate is off, locate the interior components of the door handle. You will see a spindle or square metal rod connecting the two handles. Use the pliers to grip and pull the spindle out of its housing. This will disconnect the handles, allowing you to remove them individually.
Remove the Exterior Handle
Next, focus on the exterior handle. While holding the handle in place, unscrew the small set screw located on the side of the handle using the Allen wrench or a similar tool. Once the set screw is loose, you should be able to pull the exterior handle away from the door.
Remove the Interior Handle
With the exterior handle removed, you can now easily access the interior handle. Hold the handle in place and unscrew the set screw located on the side. Once the set screw is loose, you can remove the interior handle from the door.
Disconnect the Latch Mechanism
Finally, you need to disconnect the latch mechanism. Locate the latch plate on the side edge of the door. Remove the screws securing the latch plate using the appropriate screwdriver. With the screws removed, you can now pull the latch mechanism out of the door and complete the removal process.
Conclusion
Removing a Kwikset door handle without any visible screws may initially seem challenging, but by following the steps outlined above, you can easily accomplish the task. Remember to handle the components with care and take your time to avoid any damage. With the right tools and a little patience, you’ll have your Kwikset door handle removed in no time!